Pi Tape® Inside Diameter Tapes - 1095 Spring Steel
These inside diameter measuring tapes are available in metric or inch markings, made of 1095 Spring steel and in sizes from 0.75" to 60" (28 mm - 1500 mm).
Each unit is delivered with a Calibration Report traceable to the National Institute of Standards and Technology (NIST).
| Part # | Diameter | Gauge | Thickness | Body Width |
|
| P01ID | .75" - 7"I.D. | 0.25" | 0.007" | 0.5" | X |
| P02ID | .75" - 9" I.D. | 0.25" | 0.007" | 0.5" | X |
| P1ID | 2" - 12" I.D. | 0.25" | 0.01" | 0.5" | X |
| P1SPID | 2" - 24" I.D. | 0.25" | 0.01" | 0.5" | X |
| P2ID | 12" - 24" I.D. | 0.25" | 0.01" | 0.5" | X |
| P2SPID | 12" - 36" I.D. | 0.25" | 0.01" | 0.5" | X |
| P3ID | 24" - 36" I.D. | 0.25" | 0.01" | 0.5" | X |
| P3SPID | 24" - 48" I.D. | 0.25" | 0.01" | 0.5" | X |
| P4ID | 36" - 48" I.D. | 0.25" | 0.01" | 0.5" | X |
| P5ID | 48" - 60" I.D. | 0.25" | 0.01" | 0.5" | X |
| PM0ID | 28 - 200mm I.D. | 6.35mm | 0.18mm | 12.7mm | X |
| PM02ID | 28 - 300mm I.D. | 6.35mm | 0.18mm | 12.7mm | X |
| PM03ID | 50 - 300mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM1ID | 100 - 300mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM1SPID | 50 - 600mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM2ID | 300 - 600mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM2SPID | 300 - 900mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM3ID | 600 - 900mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM3SPID | 600 - 1200mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM4ID | 900 - 1200mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |
| PM5ID | 1200 - 1500mm I.D. | 6.35mm | 0.25mm | 12.7mm | X |