Tapco CC-XD "Xtreme Duty" Elevator Buckets

PDF Logo for Tapco CCXD Specifications Sheet
Tapco CC-XD "Xtreme Duty" Elevator Bucket Catalog
The CC-XD "Xtreme Duty", extra-strength bucket was built to hold up under the most rigorous of conditions.  The extra thick walls and reinforced lip create a stronger and tougher CC-style bucket, while its higher ears and flat bottom breaks give it a greater capacity.
Tapco CC-XD
Polyethylene
Non-corrosive, tough and flexible.  Causes less product damage, reduces back legging, and is non-sparking.  Lightweight and has a clean discharge.
Tapco CC-XD
Nylon
Rigid, abrasion resistant, non-sparking and non-corrosive. Higher heat resistance than the Polyethylene or Urethane materials.
Tapco CC-XD
Urethane
For severe-duty and abrasive applications.  Non-corrosive, tough and flexible.  Non-sparking, lightweight and clean discharging.

Fun Fact:

Many livestock farms utilize the poly and nylon elevator buckets as feed bins for their animals.

Style:
CC-XD "Xtreme Duty"
CC-XD "Xtreme Duty"
CC-XD "Xtreme Duty"
Design:
High Speed Centrifugal Discharge
High Speed Centrifugal Discharge
High Speed Centrifugal Discharge
Material:
Polyethylene
Impact Modified Nylon
Thermoplastic Urethane
Method of Manufacture:
Injection Molded
Injection Molded
Injection Molded
Color:
Blue or White
Gray
Beige (Tan)
Temperature Range:
-60ºF - +200ºF (-51ºC - +93ºC)
-40ºF - +275ºF (-40ºC - +135ºC)
-60ºF - +212ºF (-51ºC - +100ºC)
Standard Drilling:
No Charge
No Charge
No Charge
Standard Venting:
Patterns 1-5 or None
Patterns 1-5 or None
Patterns 1-5 or None
Recommended Minimum Spacing:
Nominal Projection + 2"
Nominal Projection + 2"
Nominal Projection + 2"
FDA Status:
Meets FDA Regulations 177.1520, 175.300, and 177.2600
Does Not Meet FDA Regulations
Does Not Meet FDA Regulations
UV Resistance:
Prolonged Exposure to UV light not recommended
Prolonged Exposure to UV light not recommended
Prolonged Exposure to UV light not recommended
Recommended Applications:
Grains, Feeds, Fertilizers, Seeds, Food Products, Chemicals, Sand, Salt, and most free-flowing Agricultural products
Grains, Soybeans, Feeds, Fertilizers, Chemicals, Sand, and most free-flowing Agricultural products
Pelletized high-fat and molasses feeds, extruded feeds, severe soybean, rice, and barley applicaitons; Excellent for extremely high throughput elevators
Limitations:
Temperatures Exceeding 200ºF/93ºC; sharp-edged material such as glass; large, dense material such as gravel over 3/8" diameter; consult your Jealco Sales Representative
Temperatures Exceeding 275ºF/135ºC; some sharp, sluggish material such as glass cullet; large, dense material such as gravel over 3/8" diameter; consult your Jealco Sales Representative

Exceeding 212ºF/100ºC; some sharp, sluggish material such as glass cullet; large, dense material such as gravel over 3/8" diameter; consult your Jealco Sales Representative
Sizes:

6x5; 7x5; 8x5; 9x5; 10x5;   11x5; 8x6; 9x6; 10x6; 11x6; 12x6; 13x6; 11x7; 12x7; 13x7; 14x7; 15x7; 16x7; 12x8; 14x8; 16x8; 18x8; 20x8*; 22x8; 12x9; 14x9; 16x9; 18x9; 20x9; 14x10*; 16x10; 18x10*; 20x10; 24x10*

6x5; 7x5; 8x5; 9x5; 10x5;   11x5; 8x6; 9x6; 10x6; 11x6; 12x6; 13x6; 11x7; 12x7; 13x7; 14x7; 15x7; 16x7; 12x8; 14x8; 16x8; 18x8; 20x8*; 22x8; 12x9; 14x9; 16x9; 18x9; 20x9; 14x10*; 16x10; 18x10*; 20x10; 24x10*

6x5; 7x5; 8x5; 9x5; 10x5;   11x5; 8x6; 9x6; 10x6; 11x6; 12x6; 13x6; 11x7; 12x7; 13x7; 14x7; 15x7; 16x7; 12x8; 14x8; 16x8; 18x8; 20x8*; 22x8; 12x9; 14x9; 16x9; 18x9; 20x9; 14x10*; 16x10; 18x10*; 20x10; 24x10*

Note:  

*Patented Designs: 20x8; 14x10; 18x10; 24x10 - allows for closer spacing / greater capacity (requires sufficient belt strength and horsepower)

* Required Field

Request A Quotation