Flexible powered conveyors

Flexible Powered Roller Conveyors: FMH BestFlex

Powered rollers that move packages of any size at a controlled speed, expand to the trailer and store away after the shift. We supply FMH BestFlex 1.5 and 1.9, plus Hytrol and Ashland powered flexible conveyor, for docks worldwide.

FMH BestFlex flexible powered roller conveyor

0 to 120 ft/min

Variable speed, forward and reverse.

100 lb per foot

Rated capacity on both BestFlex series.

Curves to 180°

Serves several dock doors from one unit.

120 V power

Single-phase, plugs into a standard outlet.

Why powered instead of gravity?

No slope needed

Powered rollers move packages without relying on gravity or package weight.

Controlled speed

Adjustable from 0 to 120 ft/min (0 to 36.6 m/min).

Less strain

Operators stop pushing cartons, which helps in long trailers.

Accumulation

Optional photo-eye zones on the BestFlex 1.9 hold packages without them pressing together.

Flexible layout

Expands, curves up to 180° and collapses for storage.

Links up

Runs alone or ties into your fixed conveyor.

BestFlex 1.5 vs. BestFlex 1.9

Both carry 100 lb per foot at 0 to 120 ft/min on 120 V single-phase power.

BestFlex 1.5 BestFlex 1.9
Rollers 1.5 in (1.9 in optional) 1.9 in, 16 ga, on 12 mm axles
Capacity 100 lb per foot 100 lb per foot
Casters 8 x 2 in standard; 6 x 2 in optional 8 x 2 in
Widths 30 in standard 18, 24, 30 and 36 in
Motors Fractional DC with serviceable brushes Fractional DC with serviceable brushes; quick-change drive belts
Accumulation Transport Optional read-between-the-rollers photo eyes for zero-pressure accumulation
Best for General shipping and receiving, fulfillment High-volume docks, 3PL and truck loading

Specifications per FMH Conveyors.

FMH BestFlex 1.5 powered conveyor

BestFlex 1.5

Light to medium duty
  • Rollers 1.5 in
  • Width 30 in standard

Compact rollers for a smaller retracted footprint, for general shipping and receiving.

FMH BestFlex 1.9 powered conveyor

BestFlex 1.9

Medium to heavy duty
  • Rollers 1.9 in, 16 ga
  • Widths 18 to 36 in

Heavier construction, quick-change drive belts and optional zero-pressure accumulation.

BestFlex accessories

PowerTrax power assist

Moves the conveyor in and out of trailers without pushing it by hand.

Impact cart

Takes the impact of heavy loading and unloading to protect the conveyor.

Auxiliary power cord

Links two conveyor sections so they run together.

FMH Conveyors was formed in 2015 when Flexible Material Handling (NestaFlex) and Best Conveyors (BestFlex) came together. It is based in Jonesboro, Arkansas and is part of Duravant.

What to send us

Packages

Size, weight and packages per hour at peak.

Length

Closed and extended length, and the trailer length you load.

Width and height

Conveyor width and working height at each end.

Accumulation

Whether packages must stop and queue without touching.

Power

Voltage and frequency at the dock. BestFlex runs on 120 V single-phase; tell us if your site is 220-240 V or 50 Hz.

Existing conveyor

Anything it must connect to.

No power at the dock, or a lighter budget? See flexible gravity conveyors. As an independent distributor we also source Hytrol and Ashland powered flexible conveyor.

Flexible powered conveyor FAQ

What is the difference between BestFlex 1.5 and 1.9?

Both carry 100 lb per foot at 0 to 120 ft/min. The 1.5 uses 1.5 inch rollers for a more compact unit and comes 30 inches wide as standard. The 1.9 uses heavier 1.9 inch 16 gauge rollers, comes in 18, 24, 30 and 36 inch widths, has quick-change drive belts and offers optional photo-eye zero-pressure accumulation.

How fast does a flexible powered conveyor run?

BestFlex runs at an adjustable 0 to 120 feet per minute (0 to 36.6 m/min), forward and reverse.

What power does BestFlex need?

120 volt single-phase AC. If your site runs 220 to 240 volts or 50 Hz, tell us when you ask for a quote so we can confirm the right electrical setup for your country.

What is zero-pressure accumulation?

Photo eyes between the rollers detect packages and stop each zone so packages queue without pushing against each other. It is optional on the BestFlex 1.9.

Should I choose powered or gravity flexible conveyor?

Gravity conveyor is lower in cost and needs no power, but depends on slope and package weight and operators often push cartons along. Powered conveyor moves any package at a set speed, which pays off in high-volume docks and long trailers.

Which flexible powered conveyor brands does Jealco source?

FMH BestFlex, plus Hytrol and Ashland powered flexible conveyor. As an independent distributor we can source others on request.

Tell us the dock, the packages and the rate

Package size and weight, packages per hour, the length you need and the power at your dock. We will recommend the BestFlex model and quote it with freight.

Phone: +1 770-998-2124 Email: sales@jealco.com Mailing address: 302 Main Street #200, Jacksboro, TN 37757 USA