Industrial Pumps and Pump Rebuild Parts
Vacuum, centrifugal, gear, diaphragm and hydraulic pumps, and the parts to rebuild the ones you already run. We source MD-Kinney, ARO, Cornell, Edwards, Viking Pump and Parker, and as an independent distributor we can match a pump or a part across brands.
Six core makers
MD-Kinney, ARO, Cornell, Edwards, Viking Pump and Parker.
Every pump type
Vacuum, centrifugal, gear, diaphragm and hydraulic.
Rebuild parts
Seals, kits and parts for older pumps, including discontinued models.
Built for export
We confirm voltage and frequency (50 or 60 Hz) before we quote.
Start here: which pump type?
Choose by what you are moving, or the vacuum you need.
| If you need to… | Pump type | Brands |
|---|---|---|
| Pull process vacuum for packaging, drying, degassing or conveying | Rotary piston or rotary vane vacuum pump | MD-Kinney, Edwards |
| Pull vacuum on a wet or dirty stream with vapor or liquid carryover | Liquid ring vacuum pump | MD-Kinney |
| Pull clean, oil-free or high vacuum (labs, coating, electronics) | Dry screw, scroll or turbomolecular pump | Edwards |
| Move large volumes of water: irrigation, dewatering, process transfer | Centrifugal or self-priming centrifugal pump | Cornell |
| Move thick fluids: oils, syrups, resins, adhesives | Internal gear or lobe pump | Viking Pump |
| Move abrasive, corrosive or shear-sensitive fluids, or run dry | Air-operated double diaphragm (AODD) pump | ARO |
| Power a hydraulic system on a machine or vehicle | Hydraulic gear, piston or vane pump | Parker |
Pump brands we source
Jealco is an independent distributor for these lines. Product lists are the maker's main types; ask for anything not shown.
MD-Kinney (Kinney vacuum pumps)
- Rotary piston vacuum pumps
- Liquid ring vacuum pumps
- Rotary vane vacuum pumps
- Vacuum boosters
- Replacement parts and rebuild kits
Kinney has built vacuum pumps since 1907 and introduced its rotary piston pump in 1909. The line is now sold as MD-Kinney, part of Ingersoll Rand, and is found in manufacturing, food processing, packaging and general industry.
Many Kinney pumps run for decades and are rebuilt rather than replaced. We source new pumps and the parts to rebuild older ones: send the model and serial number from the nameplate.
Request a Quote
ARO
- Air-operated double diaphragm (AODD) pumps
- EVO Series electric diaphragm pumps
- Piston pumps
- Drum and container pumps
- Diaphragm pump repair kits and parts
ARO, founded in 1930 in Bryan, Ohio, and part of Ingersoll Rand since 1990, is a widely specified name in diaphragm pumps.
AODD pumps are self-priming and can run dry without damage, which makes them a common choice for viscous, abrasive or chemically aggressive fluids.
Request a Quote
Cornell Pump
- Centrifugal pumps
- Self-priming centrifugal pumps
- Submersible pumps
- Solids-handling and slurry pumps
- Food process pumps
Cornell Pump Company has built centrifugal pumps in Portland, Oregon since 1946, with a strong following in agriculture, food processing, municipal and general industry.
Its self-priming pumps are popular for irrigation and dewatering, and its solids-handling designs move fluids that would clog a standard impeller.
Request a Quote
Edwards Vacuum
- Rotary vane vacuum pumps
- Dry screw vacuum pumps
- Scroll vacuum pumps
- Roots vacuum boosters
- Turbomolecular pumps
- Vacuum systems and accessories
Edwards, founded in London in 1919 and part of the Atlas Copco group since 2014, makes vacuum pumps from oil-sealed rotary vane units to dry and high-vacuum pumps.
Dry pumps keep oil out of the process, which matters in food, pharmaceutical, laboratory and coating applications.
Request a Quote
Viking Pump
- Internal gear pumps
- External gear pumps
- Rotary lobe pumps
- Circumferential piston pumps
- Sanitary and food-grade pumps
Viking Pump, a unit of IDEX Corporation, introduced the original internal gear pump in 1911 in Cedar Falls, Iowa.
Internal gear pumps handle thick fluids such as oils, resins, adhesives, syrups and polymers, with steady flow and gentle handling of shear-sensitive products.
Request a Quote
Parker Hannifin
- Hydraulic gear pumps
- Hydraulic piston pumps
- Hydraulic vane pumps
- Pump repair kits and parts
Parker Hannifin, founded in Cleveland in 1917, is one of the largest motion and control companies, and its hydraulic pumps run mobile equipment and industrial machinery.
Send the full Parker model code from the pump; it defines displacement, rotation, shaft and ports, and we match it exactly.
Request a QuoteReplacing a pump or rebuilding one: what to send us
The nameplate answers most questions. The rest takes a minute.
The nameplate
Maker, model and serial number. A photo of the plate is best.
What it pumps
The fluid or gas, its temperature, and any solids, vapor or chemicals in it.
Flow and pressure
Flow rate and pressure, or the vacuum level and pumping speed you need.
Power
Voltage, phase and frequency. A pump on 50 Hz runs slower than on 60 Hz, so we confirm the motor.
Connections
Inlet and outlet size and thread or flange standard.
Parts only?
Tell us which parts, or ask for the rebuild kit for your model.
Other pump brands
We also source pumps and replacement parts from Bosch Rexroth, Franklin Electric, Goulds, Hawe Hydraulik, Hypro, Selwood and Vickers, among others. As an independent distributor we are not tied to one maker's catalog, and we regularly find parts for older and discontinued pumps. Send the model or your specifications.
Pneumatics
Valves, cylinders, manifolds and air preparation.
Gearing
Gearboxes and gear reducers for pump drives.
Reuland
Reuland motors, pump adapters and flexible couplings.
Industrial pump FAQ
What types of industrial pumps does Jealco supply?
Vacuum pumps (rotary piston, rotary vane, liquid ring, dry screw, scroll and turbomolecular), centrifugal pumps, gear and lobe pumps, diaphragm pumps and hydraulic pumps, along with replacement parts and rebuild kits for pumps already in service.
Are Kinney vacuum pumps still made?
Yes. Kinney pumps are now sold under the MD-Kinney name, part of Ingersoll Rand. We source new MD-Kinney pumps and parts to rebuild older Kinney pumps. Send the model and serial number from the nameplate.
What is the difference between a liquid ring and a rotary vane vacuum pump?
A liquid ring pump uses a rotating ring of liquid, usually water, to seal and compress the gas, so it tolerates moisture, vapor and liquid carryover. A rotary vane pump uses sliding vanes in a housing and generally suits cleaner, drier gas and deeper vacuum levels. If your process carries moisture, particulates or condensable vapors, a liquid ring pump is usually the more durable choice.
When should I choose a diaphragm pump over a centrifugal pump?
A diaphragm pump moves fluid with a flexible membrane rather than a spinning impeller, so no rotating seal touches the fluid. That suits abrasive slurries, corrosive chemicals and shear-sensitive products, and an air-operated diaphragm pump can self-prime and run dry. A centrifugal pump is more efficient for high-volume transfer of thin, clean liquids.
Can you supply pumps for 50 Hz power?
Yes. Tell us the voltage, phase and frequency at the site. An induction motor runs about one-sixth slower on 50 Hz than on 60 Hz, which lowers flow and pressure, so we confirm the motor and the pump's performance at your frequency before we quote.
Can Jealco source parts for older or discontinued pumps?
Yes. As an independent distributor we are not limited to current catalogs, and we regularly source seals, rebuild kits and parts for older pumps across several makers, including models the original brand no longer supports. Send the nameplate details and a photo.
Which pump brands does Jealco source?
MD-Kinney, ARO, Cornell, Edwards, Viking Pump and Parker, plus Bosch Rexroth, Franklin Electric, Goulds, Hawe Hydraulik, Hypro, Selwood and Vickers. We can source other brands on request.
Send the nameplate, the fluid and the duty
A photo of the pump's nameplate, what it pumps, the flow and pressure or vacuum, and your power supply. We will come back with a recommendation, not just a price.