Brands & Distribution Status

The Brands We Supply — and How We Supply Them

Jealco is an independent industrial distributor and exporter, founded in 1950. We are an authorized distributor for a few core lines, and an independent source and cross-reference for hundreds of other manufacturers. This page says plainly which is which.

Authorized for 3 lines

Pi Tape, Tapco and Ampco — recognized by those manufacturers.

Independent for the rest

Hundreds of manufacturers sourced across brands, not one catalog.

Cross-reference & obsolete

We match discontinued and hard-to-find parts to a current equivalent.

Exporting since 1950

Sourcing and export handled together, to customers worldwide.

Lines we are authorized for

For these three manufacturers, Jealco is an authorized distributor.

Authorized distributor

Pi Tape

Precision diameter and circumference measuring tapes — outside and inside diameter, inch and metric, spring and stainless steel.

Jealco is listed as a distributor by Pi Tape. See our Pi Tape page.

Authorized distributor

Tapco

Elevator buckets in polyethylene, urethane, nylon, steel and ductile iron, plus elevator bolts and hardware.

Recognized by Tapco as a distributor. See our elevator buckets page.

Authorized distributor

Ampco Safety Tools

Non-sparking, non-magnetic and corrosion-resistant hand tools for hazardous areas.

Recognized by Ampco as a distributor. See our Ampco safety tools page.

Lines we supply as an independent distributor

For every other manufacturer we carry, Jealco is an independent distributor. We source across brands rather than being tied to one catalog — which is exactly what makes cross-referencing and replacement sourcing possible. The lines below are only a small sample of what we carry; there are many more, so if you don’t see a brand here, just ask:

Elevator buckets Maxi-Lift, 4B, Nu-Hy
Power transmission & gearing Dodge, Grove Gear, Winsmith, SEW, Reuland / Trilex couplings
Electric motors Reuland, plus cross-referenced replacements for Baldor, WEG, Leeson and other motor brands
Bearings & skate wheels Frantz and other bearing and skate-wheel makers
Conveyors & components Interroll, Omni Metalcraft, Hytrol, FMH (BestFlex / Nestaflex), PPI, Ralphs-Pugh
Conveyor belting Continental, Superior and other belting makers, cut and spliced to size
Pneumatics ASCO, Numatics, Bimba, Parker, Norgren, Festo
Pumps MD-Kinney, Edwards, Cornell, Viking, ARO, Parker
Don’t see your brand? This list is a fraction of what we supply. If a manufacturer or part isn’t shown here, it almost certainly doesn’t mean we can’t get it — just ask and we’ll source it or cross-reference an equivalent.
"Independent" is the advantage, not a disclaimer. Because we are not locked to a single brand's catalog, we can recommend the right part for the application, cross-reference between manufacturers, and find a current equivalent when the original is discontinued. We say "independent distributor," never "authorized," for any line not listed in the section above.

Cross-reference, replacement and obsolete parts

Sourcing what a single-brand distributor can't is the core of the independent model. If a part is discontinued, unbranded, or you only have the old one in hand, send us what you have:

A nameplate photo For motors, gearboxes and reducers — the nameplate identifies the exact unit.
A part number Even an old or superseded number; we cross-reference it to a current equivalent.
The old part, or its dimensions For bearings, buckets, belting and couplings, measurements let us match it.
The application Load, speed, temperature, environment — so the replacement fits the job, not just the box.

Brands & distribution FAQ

Is Jealco an authorized distributor?

For a few lines, yes: Jealco is an authorized distributor for Pi Tape, Tapco and Ampco. For the hundreds of other manufacturers we supply, we are an independent distributor and exporter, which lets us cross-reference and source across brands rather than being tied to one catalog.

Can you supply a brand you are not authorized for?

Yes. As an independent distributor we source across manufacturers, including brands we are not an authorized distributor for, and we cross-reference to an equivalent when a part is obsolete or hard to find. Send us the part number, nameplate photo or sample and we will source or match it.

What is the difference between an authorized and an independent distributor?

An authorized distributor is recognized by the manufacturer to sell that brand. An independent distributor sources across many manufacturers and is not tied to a single catalog. Jealco is authorized for Pi Tape, Tapco and Ampco, and an independent source for the rest — which is an advantage when you need cross-brand sourcing or a replacement for a discontinued part.

Do you handle obsolete or discontinued parts?

Yes. Sourcing obsolete and hard-to-find industrial components, and cross-referencing them to a current equivalent across manufacturers, is a core part of what an independent distributor does. Send the old part number or a nameplate photo and we will identify a replacement.

All manufacturer and brand names are trademarks of their respective owners and are used here for identification only. Their use does not imply authorization or endorsement except for the lines listed above as authorized (Pi Tape, Tapco, Ampco).

Tell us what you need sourced

Authorized line or not, in production or long discontinued — send the part number, nameplate photo or dimensions and we will source it or cross-reference an equivalent.

Phone: +1 770-998-2124 Email: sales@jealco.com Address: 302 Main Street #200, Jacksboro, TN 37757 USA